A DieHard electric battery charger allows you to recharge without having another car present. It takes longer, but is simple and requires only an AC outlet. Always make sure that the charger is designed to work with your battery's voltage. Most cars use a 12-volt battery.
- Manual Crank Battery Charger
- Sears 40/2 Amp Manual Battery Charger
- Die Hard 2/40/200 Amp Manual Battery Charger Owners Manual Manual
- Die Hard 2/40/200 Amp Manual Battery Charger Owner's Manual
- Car Battery Charger
Showing 21,348 questions in: 'diehard 2 40 200 amp manual battery charger' Answers. Battery Charger, Manual 6/2 Amp. OWNER'S MANUAL DieHard, BATTERY CHARGER 10/2 Amp Automatic ENGINE START 50 Amp Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. Sears has an abundant selection of car battery chargers to recharge your ride. User Ratings DieHard Die Hard 71221 Manual Battery Charger, 10 Amp. More Deals & Coupons Like 'Sears: DieHard 2/40/200 amp Manual Battery Charger '.
Step 1
Set the battery charger to the correct voltage, usually 12 volts for a car.
Step 2
Switch the output selector to the desired number of amps. The lower the number of amps, the longer it takes to charge.
Step 3
Attach the positive battery charger clamp to the positive post first for batteries that are negative-grounded, as most car batteries are. Attach the negative battery charger clamp to the negative post.
Manual Crank Battery Charger
Plug the battery charger into a grounded outlet. Charge the battery until the ammeter needle indicates that the battery is charged. Unplug the charger when the ammeter indicates a full charge. Remove the clamps, negative first.
Tips
- If the charger has a 200-amp 'jump start' setting, connect as directed and try starting the car after about a minute.
- Most car batteries take between two and three hours to charge at 10 amps.
Warnings
- Do not allow the battery to overcharge.
- If you need to use an extension cord, use only a heavy-duty three-pronged type.
- Turn your head when connecting and disconnecting clamps, in case of a spark.
More Articles
A DieHard electric battery charger allows you to recharge without having another car present. It takes longer, but is simple and requires only an AC outlet. Always make sure that the charger is designed to work with your battery's voltage. Most cars use a 12-volt battery.
Step 1
Set the battery charger to the correct voltage, usually 12 volts for a car.
Step 2
Switch the output selector to the desired number of amps. The lower the number of amps, the longer it takes to charge.
Step 3
Attach the positive battery charger clamp to the positive post first for batteries that are negative-grounded, as most car batteries are. Attach the negative battery charger clamp to the negative post.
Plug the battery charger into a grounded outlet. Charge the battery until the ammeter needle indicates that the battery is charged. Unplug the charger when the ammeter indicates a full charge. Remove the clamps, negative first.
Sears 40/2 Amp Manual Battery Charger
Tips
- If the charger has a 200-amp 'jump start' setting, connect as directed and try starting the car after about a minute.
- Most car batteries take between two and three hours to charge at 10 amps.
Die Hard 2/40/200 Amp Manual Battery Charger Owners Manual Manual
Warnings
Die Hard 2/40/200 Amp Manual Battery Charger Owner's Manual
- Do not allow the battery to overcharge.
- If you need to use an extension cord, use only a heavy-duty three-pronged type.
- Turn your head when connecting and disconnecting clamps, in case of a spark.